From: Michael Davis (miked@netrus.net)
Date: Thu Sep 12 2002 - 19:15:30 GMT-3
For the group...
Mike #7303
----- Original Message -----
From: "Michael Davis" <miked@netrus.net>
To: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
Sent: Thursday, September 12, 2002 12:31 AM
Subject: Fw: PPP over frame
> Hi Harbir,
>
> I've got a working config for you for a ppp multlink over a pair of
> frame-relay circuits. Particularly important is the "no ip route-cache."
>
> I was able to reproduce your issue. It seems that once you have
configured
> an interface-dlci without ppp, you cannot change it to include ppp UNLESS
> you remove the subinterface completely 'no interface s0/0.1', wr mem, then
> reload. Once you've done that, you can reconfigure the subinterface and
the
> 'frame-relay interface-dlci 111 ppp virtual-template1' with the
appropriate
> dlci.
>
> HTH,
>
> Mike #7303
>
>
>
> interface loopback2
> ip address 1.1.1.1 255.255.255.252
>
> interface Virtual-Template1
> bandwidth 3088
> ip unnumbered loopback2
> no ip route-cache
> ppp multilink
>
>
>
> int serial0/0
> encapsulation frame-relay ietf
> int serial 0/0.1
> frame-relay interface-dlci 117 ppp virtual-template1
>
>
> interface Serial0/1
> encapsulation frame-relay IETF
>
>
> interface Serial0/1.401 point-to-point
> frame-relay interface-dlci 401 ppp Virtual-Template1
>
>
> ----- Original Message -----
> From: "Michael Davis" <miked@netrus.net>
> To: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
> Sent: Wednesday, September 11, 2002 3:30 PM
> Subject: Re: PPP over frame
>
>
> > Hi Harbir,
> >
> > I haven't done it before, but I'll be trying some MLP over FrameRelay
> > tonight on a pair of 2620s. I'll let you know how it goes. I'm running
> > 12.1(5)T10 (image is c2600-is-mz.121-5.T10.) The parser is taking my
DLCIs
> > and allowing ppp without issue. But at one point, I removed my
> > virtual-template, then tried to remove the "frame-relay interface-dlci
401
> > ppp virtual-template 1" and the parser choked on "ppp" same as yours
did.
> I
> > wonder if you need to configure a virtual-template before doing the
serial
> > interface/subinterfaces.
> >
> > Mike, #7303
> >
> > ----- Original Message -----
> > From: "Kohli, Harbir" <harbir.kohli@bellnexxia.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, September 11, 2002 10:32 AM
> > Subject: PPP over frame
> >
> >
> > > Hi,
> > >
> > > Has anyone configured PPP over frame-relay?
> > > Does anyone have a working config?
> > > I am trying to apply my understanding of what I read in the
> documentation
> > > guide and not getting very far.
> > > Two routers with frame-connection
> > > R3-Frame-R4
> > > R3 uses DLCI 304 to R4 and R4 uses DLCI 403.
> > >
> > >
> > > R3(config-subif)#frame-relay interface-dlci 34 ?
> > > cisco Use CISCO Encapsulation
> > > ietf Use RFC1490/RFC2427 Encapsulation
> > > protocol Optional protocol information for remote end
> > > <cr>
> > > R3(config-subif)#frame-relay interface-dlci 32 ?
> > > cisco Use CISCO Encapsulation
> > > ietf Use RFC1490/RFC2427 Encapsulation
> > > ppp Use RFC1973 Encapsulation to support PPP over FR
> > > protocol Optional protocol information for remote end
> > > If I use a DLCI number other than 32 the CLI does not even allow me to
> > > specify the PPP option.
> > > Any suggestions?
> > >
> > > Thanks
> > > __________________________________________________________________
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3