RE: Dlsw border , peer groups

From: beda jain (bpjain@cisco.com)
Date: Thu Sep 12 2002 - 14:42:59 GMT-3


Hi,

which one is correct.

Thanks,
Beda
At 01:00 AM 9/12/2002 +0100, Omer Ansari wrote:
>Steve,
>
> > Also check you don't have the peer on demand defaults changed from the
> > default (TCP), if you do ensure that you have the same protocol on the
> other
> > end using the prom peer-defaults command. E.g if you wanted to use FST for
> > POD instead of TCP you would have peer-on-demand defaults FST on the
> > receiving end and prom peer-defaults FST on the other.
>
>shouldn't it be the other way around? meaning
>
>prom peer-defaults fst on the receiving end, and
>peer-on-demand defaults fst on the initiating end?
>
>
>
> > Steve
> > #10055
> >
> >
> >
> > -----Original Message-----
> > From: ping pong [mailto:pong964815@hotmail.com]
> > Sent: 11 September 2002 07:18
> > To: ccielab@groupstudy.com
> > Subject: Dlsw border , peer groups
> >
> >
> > Hello group,
> > I have tried to configure peer groups and border peers in dlsw. For
> > instance I would configure 2 groups (30 and 40) and in each group have two
> > routers. The border peer in each peer group would peer with the other
> border
> >
> > peer and be set on promiscuous. The non border peers in the group would
> have
> >
> > a connection to the border peers of their group and be set on promiscuious.
> > The non border peers do peer with the border peers of their group and the
> > border peers also peer with the opposite border router and their non-border
> > peer in their group.
> > -====The problem is that I can never get the non-border peers to do a peer
> > on demand with each other.-==== Does traffic need to be passing between the
> > groups for a pod to be established? I also tried setting icanreach on each
> > router and still the pod's never activate. Any help would be appreciated.
> >
> > _________________________________________________________________
> > Send and receive Hotmail on your mobile device: http://mobile.msn.com



This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:50 GMT-3