From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Wed Sep 11 2002 - 12:35:07 GMT-3
What are u trying to acheive ? OSPF wont learn EIGRP routes.Under OSPF
when u redistribute give "redistribute eigrp 1 subnets metric xx" else ur
subnets of EIGRP 10.1.1 and 10.3.1 wont get into OSPF . Also why do u
want to redistribute the connected routes ? when u are already
redistributing EIGRP wont they get into OSPF.
Am i mssing anything ?
Good Luck,[IMAGE]
Kasturi.
>From: "VANGADASALAM,SURENDRAN (Non-HP-Singapore,ex4)" >Reply-To:
"VANGADASALAM,SURENDRAN (Non-HP-Singapore,ex4)" >To: "Ccielab (E-mail)"
>Subject: EIGRP AND OSPF >Date: Wed, 11 Sep 2002 22:39:59 +0800 > >Hi
all, > I have typed out a simple scenario. Below is the config. Sorry if
>there is any typo. In the scenario will OSPF learn the eigrp routes? In
y >case it seems like the filter list is blocking even the EIGRP
routes...... > > > >int e0 >ip address 10.1.1.1 255.255.255.0 > >int e1
>ip address 10.2.1.1 255.255.255.0 > >int e3 >ip address 10.3.1.1
255.255.255.0 > >router eigrp 1 >network 10.0.0.0 >no auto-summary
>redistribute ospf 1 metric 1000 10 255 1 1500 >passive-interface default
>no passive-interface e1 > >router opsf 1 >network 10.2.1.1 0.0.0.0 area
0 >redistribute eigrp 1 metric 20 >redistribute connected metric 20
route-map filter > >route-map filter 10 permit >match ip address 1 >
>access-list 1 permit 10.3.1.0 0.0.0.255
>__________________________________________________________________ >To
unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: >unsubscribe ccielab
------------------------------------------------------------------------
MSN Photos is the easiest way to share and print your photos: Click Here
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:48 GMT-3