From: Eric D. Thiel (ccierslab@onefishtwofish.org)
Date: Wed Sep 11 2002 - 02:52:25 GMT-3
I've been thinking about getting one, but wasn't sure how tough it would be
to set up. Any tips? Do I need the flash, or is it easy to boot it off tftp?
Looks like a unit without flash is much cheaper, so I'd like to try it that
way.
Thanks,
Eric
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'Geoff Zinderdine'" <geoffz@mts.net>; "'Michael Schwarz'"
<flying_eskimo@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, September 10, 2002 8:49 PM
Subject: RE: Xyplex Terminal Server help
> Xyplex terminal servers are very nice! They take up a whole lot less
> space than an IGS or something ugly like that. :) 40 ports in a 1U
> unit is pretty slick!
>
> They just take a little getting used to, but they're cheap on Ebay!
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Geoff Zinderdine
> Sent: Tuesday, September 10, 2002 11:31 PM
> To: Michael Schwarz; ccielab@groupstudy.com
> Subject: RE: Xyplex Terminal Server help
>
>
> Why not take a cheap router with ethernet like an IGS or 1600 and telnet
> to it, then use ip host statements so it telnets to the Xyplex on the
> ports that the routers are on:
>
> ip host R1 2001 192.168.100.1
> ip host R2 2002 192.168.100.2
> ....
>
> I haven't specifically used the Xyplex so I am not certain that it uses
> those particular ports for the sessions, but some minor variation of
> that should give you an IOS interface to your term server.
>
> HTH,
>
> Geoff Zinderdine
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Michael Schwarz
> Sent: Tuesday, September 10, 2002 9:35 PM
> To: ccielab@groupstudy.com
> Subject: OT: Xyplex Terminal Server help
>
>
> OT, but Im sure im not the only one using the cheaper Xyplex units
> instead of a 2511.
>
> Trying to make a xyplex maxserver 1600 "feel" like a cisco 2511.
>
> Anyone on this list fairly fluent in these Xyplex terminal servers care
> to
> share any tips on how to achieve this or something close? Sample
> configs?
> Links to good resources?
>
> I've read 3-400 pages of command ref, config guides and still can't get
> this thing to be easy to use. TIA
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:48 GMT-3