Re: ATM subinterface vpi/vci

From: MADMAN (dave@interprise.com)
Date: Mon Sep 09 2002 - 16:05:13 GMT-3

• Next message: Walker, Todd: "RE: Cat3550 on CCIE Lab"
• Previous message: Jim Brown: "RE: Cat3550 on CCIE Lab"
• Maybe in reply to: Guoqi Cui: "ATM subinterface vpi/vci"
• Next in thread: Jay Hennigan: "Re: ATM subinterface vpi/vci"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

 Here is the "new" way:

interface ATM1/0.32 point-to-point
 ip address 1.1.1.2 255.255.255.0
 pvc madman 1/32

  or

interface ATM3/0.35 point-to-point
 atm pvc 1 1 35 aal5snap 5000 5000 1 oam 10

  Dave

Guoqi Cui wrote:
>
> Hi, group:
> Is there a similar command like frame-relay "
> frame-relay interface dcli" in ATM to assign vpi/vci
> to an atm subinterface?
>
> Thanks,
>
> Guoqi
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Finance - Get real-time stock quotes
> http://finance.yahoo.com

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"You don't make the poor richer by making the rich poorer." --Winston
Churchill

• Next message: Walker, Todd: "RE: Cat3550 on CCIE Lab"
• Previous message: Jim Brown: "RE: Cat3550 on CCIE Lab"
• Maybe in reply to: Guoqi Cui: "ATM subinterface vpi/vci"
• Next in thread: Jay Hennigan: "Re: ATM subinterface vpi/vci"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3