configure 3920

From: Yu Kay (kaykkyu@yahoo.com)
Date: Sun Sep 08 2002 - 23:01:59 GMT-3

• Next message: Chien-Cheng Hsieh: "Re: Telnet problems- maybe simple, but I can not figure it out"
• Previous message: chenyan: "the difference between the flow-based wred and the diffserv"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I never touch the 3920 and I want some person that
give me some hints

Suppose I have following network

r2 -- Ring 10 -- r3 -- r4 -- r5 -- Ring 20

In the following configure (I guess), since the two
rings are seperated, so we need to create two 'bridge'
in 3920 (BRF400 & BRF 500) ?

If true, then does the bridge number of BRF400 is
different to BRF500 ?

And then, we create appropiate TrCRF for each TrBRF.

Finally, assign two ports for VLAN crf401 and onw port
for crf501 ?

For ring 10 For ring 20

TrBRF TrBRF
VLAN ID 400 VLAN ID 500
VLAN Name BRF400 VLAN Name BRF500
State Operational State Operational
MTU 4472 MTU 4472
Bridge Number 0x0F Bridge Number 0x0E

TrCRF TrCRF
VLAN ID 401 VLAN ID 501
VLAN Name crf401 VLAN Name crf501
Parent VLAN BRF400 Parent VLAN BRF500
State Operational State Operational
Ring Number auto Ring Number auto
Bridge Mode SRB Bridge Mode SRB

• Next message: Chien-Cheng Hsieh: "Re: Telnet problems- maybe simple, but I can not figure it out"
• Previous message: chenyan: "the difference between the flow-based wred and the diffserv"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:46 GMT-3