From: Brent Stewart (brent@stewart.hickory.nc.us)
Date: Fri Sep 06 2002 - 22:56:19 GMT-3
Right, but the original question was "what ATM switch has T-1 interfaces
to go to my 3810s"? The Centillion 100s are indeed cheap - they're down
to $100 on e-bay - but they've got fiber interfaces and I'm looking for
RJ45 T1s. Thanks!
Brent D. Stewart, CCSI
Global Knowledge
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nigel Taylor
Sent: Friday, September 06, 2002 2:55 AM
To: ccielab@groupstudy.com
Subject: Re: ATM Switch Advice Sought
Rob,
At one time and I believe you might still be able to get your
hands on those Older Bay(now Nortel) Centillion 100 ATM switches for
next to
nothing. A few months ago I was able to get a couple of them for around
200$ a piece with the needed 4-port OC-3 ATM interfaces. If you're
looking
for an somewhat basic ATM device to perform the standard features, these
devices will do LANE, MPOA, PVC, PVPs, and SPVCs. The interface using
SpeedView was very easy to use as well.
Also, depending on when you look on ebay there are some deals to be
found.
I was fortunate enough to fin 2 Fore ASX200BX switches for around 500$ a
piece. Look around sometimes folks don't realize what they're selling
and
that equates to a bargain on your part.
HTH
Nigel
----- Original Message -----
From: "Rob Ponkey" <ponkeyr@hotmail.com>
To: <ccielab@groupstudy.com>
Cc: <brent@stewart.hickory.nc.us>
Sent: Friday, September 06, 2002 1:32 AM
Subject: Re: ATM Switch Advice Sought
> The 3810s will act as LANE clients but will they do CLIP? LANE is not
on
> the R&S Lab exam according to Cisco.
>
> Fore (Marconi) has T1/ATM modules for the ASX 200, 1000, 1200
platform. I
> thought they had a less expensive line of ATM switches (LE maybe) but
I
> cant seem to find them at Marconi.com. Some of the stuff is available
on
> Ebay but I would expect it to be a little pricey for personal use.
>
> I think the LS1010 has T1/ATM ports available also.
>
> Hope that helps.
>
> Rob
>
> >From: "Brent Stewart" >Reply-To: "Brent Stewart" >To: >Subject: ATM
> Switch Advice Sought >Date: Fri, 6 Sep 2002 00:24:53 -0400 > >I have
two
> 3810s with T1/ATM (RJ45) interfaces and would like to use >them to
> simulate lab ATM issues. Of course I can do back-to-back PVCs, >but
I'm
> also interested in SVCs. Is there a switch available that will >allow
me
> to use these interfaces for SVCs? I've looked at several ATM
>switches,
> but they all seem to use fiber connections that run 155MB/s. >I
> appreciate your thoughts. > > > > > >Brent D. Stewart , CCSI > >Global
> Knowledge > >[GroupStudy.com removed an attachment of type
> application/octet-stream which had a name of image001.gif]
> >__________________________________________________________________
>To
> unsubscribe from the CCIELAB list, send a message to
> >majordomo@groupstudy.com with the body containing: >unsubscribe
ccielab
>
>
------------------------------------------------------------------------
>
> Chat with friends online, try MSN Messenger: Click Here
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:46 GMT-3