From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Wed Sep 04 2002 - 11:24:27 GMT-3
Kelly,
Check a and do a couple of things.
1. There should be no white space after the passwords - show key-chain
should show it.
2. The passwords should be same ..just check maybe u have taken care if
it.
3. Remove the entire rip config and repaste it once agian...
4. Last resort Reboot and see...
Let us know what u see as error in debug messages...i have also not been
able to get it to work with some versions.
Good Luck,[IMAGE]
Kasturi.
>From: "Kelly Cobean" >Reply-To: "Kelly Cobean" >To: "ccielab" >Subject:
RIP v2 authentication >Date: Tue, 3 Sep 2002 23:07:16 -0400 > >All, > I'm
trying to use RIP v2 MD5 authentication and cannot seem to get it to
>work. I'm doing one of the FatKid labs and I've matched the RIP
>configuration that they list, but I continuously get the "invalid
>authentication" message when debugging RIP. I've got version 2 specified
on >both routers, and have the "ip rip auth mode md5" and "ip rip auth
key test" >commands on the two joining interfaces, and I've got identical
key-chains >configured on both routers....Am I missing anything? I've
even tried >plain-text authentication and can't make it work. Thanks. >
>Kelly
>__________________________________________________________________ >To
unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: >unsubscribe ccielab
------------------------------------------------------------------------
MSN Photos is the easiest way to share and print your photos: Click Here
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:44 GMT-3