RE: [OT]Is it possible to load balancing two bri port with

From: Desimone, Aurelio (ADesimone@refco.com)
Date: Wed Sep 04 2002 - 08:41:41 GMT-3

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: redistribute ospf to igrp again"
• Previous message: Nigel Taylor: "RE: NSSA and type 7 LSA's -same problem. Configs incl."
• Maybe in reply to: bravo: "[OT]Is it possible to load balancing two bri port with"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

yes, its quite simple; just use a rotary group or a pool on the router with
the BRIs.

Aurelio

-----Original Message-----
From: bravo [mailto:bravojun@hanmail.net]
Sent: Wednesday, September 04, 2002 4:17 AM
To: ccielab@groupstudy.com
Subject: [OT]Is it possible to load balancing two bri port with
multilink ppp?

Hello. guys
Our one site has 3600 with one pri and the other site has two bri line.
So is it possible to use both two bri line?
The multilink ppp can be used in this situation?
Multilink ppp can load balancing two isdn bri line?
I found the document in cisco web site that configured both two bri line.

http://www.cisco.com/warp/public/471/bri-mppp.shtml

It can also be applied when use one pri and two bri?
Thanks in advance.

[TABLE NOT SHOWN][IMAGE]

[TABLE NOT SHOWN][TABLE NOT SHOWN]

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: redistribute ospf to igrp again"
• Previous message: Nigel Taylor: "RE: NSSA and type 7 LSA's -same problem. Configs incl."
• Maybe in reply to: bravo: "[OT]Is it possible to load balancing two bri port with"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:43 GMT-3