From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Tue Sep 03 2002 - 06:24:49 GMT-3
hmm..
term rxspeed ?
term telnet speed ?
care to elaborate how to change delay to 1 msec and line delay between 500-750 msec on the various
software used at CCIE lab ?
thx
Donny
Phil
<ciscostudent1@ya To: William Wong Kun Sing <wong_kunsing@solsis-eso.com.my>, "'Groupstudy'"
hoo.com.br> <ccielab@groupstudy.com>
Sent by: cc:
nobody@groupstudy Subject: RE: Ping Script? re-phrase
.com
03-09-2002 05:47
Please respond to
Phil
William,
To make it work you have to change the character delay to 1 msec and the line delay between 500 and
750 msec in the terminal emulator software.
Phil
William Wong Kun Sing <wong_kunsing@solsis-eso.com.my> escreveu: Guys,
Sorry, what i mean is after i have finished my lab and want to test the
routing info for all the routers. Like for example use the notepad to have
multiple ping command as the below:
ping 1.1.1.1
ping 1.1.2.1
ping 1.1.3.1
and copy & paste on the routers. I have tried that but it will only ping
the first address and then stop. I need a ping script which can ping all
the interfaces to save some expensive time.
Thanks.
Best regards,
William
-----Original Message-----
From: Dimitris Vassilopoulos [mailto:Dimitris.Vassilopoulos@eurodyn.com]
Sent: Tuesday, September 03, 2002 2:05 PM
To: William Wong Kun Sing
Cc: 'Groupstudy'
Subject: Re: Ping Script?
Try the extended ping, with the repeat count set to more than the
default:
Router#ping
Protocol [ip]:
Target IP address: x.x.x.x
Repeat count [5]: 100
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 100, 100-byte ICMP Echos to x.x.x.x, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (100/100), round-trip min/avg/max = 1/2/4 ms
Router#
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:42 GMT-3