From: Song Mu (songmu@yahoo.com)
Date: Mon Sep 02 2002 - 15:01:33 GMT-3
There is a way to setup an ISDN Emulator by using VIC 2B-NT/TE card. It
will save you some bucks if you already have a NM-2V on a 2600/3600
router.
Song
--- ChrisH <chrish@bjen.com> wrote:
> You will have to have an ISDN Emulator for this. ISDN, unlike
> Frame-relay,
> cannot not use a router as a simulator.
>
> Chris
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
> Of
> Connelly.Sylvester@btinternet.com
> Sent: Sunday, September 01, 2002 2:35 PM
> To: ccielab@groupstudy.com
> Subject: ISDN Simulation
>
>
> Does anyone has the config's to simulate ISDN using th Aux ports?
>
> ----- Original Message -----
> From: "Guoqi Cui" <guoqicui@yahoo.com>
> To: "Frank" <frank@buff-net.com>; "'jin'" <jin10101010@hotmail.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Sunday, September 01, 2002 10:55 AM
> Subject: RE: dlsw...
>
>
> > You should use " fram map dlsw dlci #" if you use
> > passthrough.
> >
> >
> >
> > --- Frank <frank@buff-net.com> wrote:
> > > Jin,
> > >
> > > LLC2 provides local acknowledgment, but when you
> > > use the
> > > pass-thru keyword you're saying don't use local
> > > acknowledgment. When
> > > you use pass-thru you must map into "dlsw" vice
> > > LLC2. This is DIRECT
> > > encapsulation.
> > >
> > > Leave off the pass-thru and you have LLC2 or DLSw
> > > Lite
> > > encapsulation. Then you must map to LLC2 as you
> > > have below.
> > >
> > > Unless you're on a sub-interface then of course use
> > > the
> > > 'frame-relay interface-dlci N' command.
> > >
> > > HTH...aloha, Frank
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> > > [mailto:nobody@groupstudy.com] On Behalf Of
> > > jin
> > > Sent: Saturday, August 31, 2002 11:12 AM
> > > To: ccielab@groupstudy.com
> > > Subject: dlsw...
> > >
> > > I'm testing fr map.
> > > But dlsw peer is 'disconnect' state still.
> > > I configured it as the cisco guide.
> > > First, dlsw remote 0 frame inter s 0 16 pass-th
> > > and then, in the inface config mode make 'fr map
> > > llc2 dlci'
> > > But now it is disconnct state..
> > >
> > > Do I have a problem that I don't know still?
> > >
> > > Thanks.
> > >
> > _________________________________________________________________
> > > Commercial lab list:
> > > http://www.groupstudy.com/list/commercial.html
> > > Please discuss commercial lab solutions on this
> > > list.
> > >
> > _________________________________________________________________
> > > Commercial lab list:
> > > http://www.groupstudy.com/list/commercial.html
> > > Please discuss commercial lab solutions on this
> > > list.
> > >
> > __________________________________________________________________
> > > To unsubscribe from the CCIELAB list, send a message
> > > to
> > > majordomo@groupstudy.com with the body containing:
> > > unsubscribe ccielab
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Finance - Get real-time stock quotes
> > http://finance.yahoo.com
> > _________________________________________________________________
> > Commercial lab list: http://www.groupstudy.com/list/commercial.html
> > Please discuss commercial lab solutions on this list.
> _________________________________________________________________
> Commercial lab list: http://www.groupstudy.com/list/commercial.html
> Please discuss commercial lab solutions on this list.
> _________________________________________________________________
> Commercial lab list: http://www.groupstudy.com/list/commercial.html
> Please discuss commercial lab solutions on this list.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:41 GMT-3