From: Tom Fortier (tom@xxxxxxxxxxx)
Date: Sat Aug 31 2002 - 15:51:31 GMT-3
Point well taken.
Thanks,
Tom
-----Original Message-----
From: Reggie Terrell [mailto:rterrell@bellatlantic.net]
Sent: Saturday, August 31, 2002 10:43 AM
To: Tom Fortier
Subject: Re: Lab Diagram
Tom,
When you use the phrase, "In the actual lab", and then ask a question,
it
arouses all of the NDA defense mechanisms.
To get real feedback, I would recommend that you not make direct
reference
to the actual lab.
Cisco monitors this mail list to determine if scenarios and questions
have
been compromised.
I know that your intentions are good. In providing this info to you,
mine
are as well.
Reggie
Tom Fortier wrote:
> You are correct; I don't want any NDA information. I want to pass or
> even fail based on what I have learned and earned. By the way, a lot
of
> my work has gone to my waist, but I don't consider it a waste.
>
> Thanks,
>
> Tom Fortier
>
> -----Original Message-----
> From: kpalmer [mailto:kip.palmer@verizon.net]
> Sent: Saturday, August 31, 2002 6:14 AM
> To: Tom Fortier
> Subject: RE: Lab Diagram
>
> Be careful what you ask...
>
> I'd hate to see all the work go to waist.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Tom Fortier
> Sent: Friday, August 30, 2002 11:38 PM
> To: ccielab@groupstudy.com
> Subject: Lab Diagram
>
> In the actual lab, how do you create your diagram? Are you provided
> with a topology diagram, or do you look at the equipment or do you
> telnet to all devices to determine capabilities?
>
> Thanks,
>
> Tom Fortier
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:43 GMT-3