From: Brian Dennis (brian@xxxxxx)
Date: Fri Aug 30 2002 - 00:57:56 GMT-3
DocCD --> Cisco IOS Release 12.1 --> Cisco IOS Release 12.1
Configuration Guides and Command References --> Cisco IOS Configuration
Fundamentals Configuration Guide, Release 12.1 --> Cisco IOS User
Interfaces --> Using the Command-Line Interface (CLI)
Designating a Keystroke as a Command Entry
Sometimes you might want to use a particular keystroke as an executable
command, perhaps as a shortcut. Use the following keystroke to insert a
system code for this purpose:
Keystrokes
Press Ctrl-V or Esc Q.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
fun_c/fcprt1/fcd101.htm#xtocid2539428
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
William Wong Kun Sing
Sent: Thursday, August 29, 2002 8:14 PM
To: 'Groupstudy'
Subject: netbios access-list host....why?
Hi guys
I tried to configure a netbios access-list which will permit this
pattern
"abc?domain". The "?" is any character right? How to do it? As you
can
see as the below output when I tried to put in the question mark.
R2(config)#netbios access-list host ccie permit abc?
WORD
My router's ios is ver 12.1(5) - C2600-DS-M)
Thanks in advance.
Best regards,
William
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:42 GMT-3