From: kym blair (kymblair@xxxxxxxxxxx)
Date: Thu Aug 29 2002 - 19:07:07 GMT-3
Scott,
To connect two ATM router interfaces back-to-back, add "ATM CLOCK
INTERNAL" to the interfaces for timing.
Kym
>From: "Chris Butler" >Reply-To: "Chris Butler" >To: >CC: >Subject: Re:
OC3 question. >Date: Thu, 29 Aug 2002 00:56:18 -0500 (CDT) > >We have two
OC3 in our network, and we have done something similar with >72o6 series
routers back to back. We had trouble with QOS. We could not >get pvc
bundles to work properly on Cat 6k, so we tested on 7200. >PVC Bundles
never did work on 6k/Flexwan, so we used LLQ instead. > >Good luck, >
>Chris > > > I have to mock a network design for a customer that will
have Dual OC3 > > circuits connecting two sites. > > > > I didn't think
it would be a problem to run them back-to-back to mock > > the
connections but being that I haven't done it > > before I thought to
throw it out there. > > > > Is there anything sticking about just
connecting OC3 interfaces > > back-to-back in a test design? > > > >
Scott > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:42 GMT-3