From: bob.dixon@xxxxxxxxx
Date: Thu Aug 29 2002 - 09:06:12 GMT-3
Folks,
I have decided to sell my equipment. At this time, I am
looking to sell everything as a package.
Here's what I have:
Routers
(1) CS-516 [16 asynch, works great as a terminal server]
(1) 2509 w/octal cable [16D/16F, 8 asynch, 1 Ethernet, 2
Serial]
(1) 2501 [16D/8F, 1 Ethernet, 2 Serial]
(2) 2503 [16D/8F, 1 Ethernet, 2 Serial, 1 ISDN BRI]
(1) 2522 [16D/16F, 1 Ethernet, 2 Serial, 8 Low-speed
Serial, 1 ISDN BRI, works great for frame switch]
(1) 2502 [16D, 8F, 1 Token Ring, 2 Serial]
(2) 2504 [16D, 8F, 1 Token Ring, 2 Serial, 1 ISDN BRI]
Switches
(1) 3920 Token Ring Switch [8D/2F, 20 Token Ring]
(1) 5005 Catalyst [WS-X5006, WS-X5014, Dual AC PS]
ISDN
(1) Teltone ISDN Demonstrator [2 ISDN U-type interfaces]
(2) Adtran ACE NT1
Management
(1) APC 9210 MasterSwitch PDU
(1) 19-inch open telco rack
(1) 5ft enclosure with 19-inch rails, power strip,
locking doors, top mounted fan
Accessories
(1) 24-port 10-Base-T Hub
(1) IBM 8228 Type-1 Mau
(2) IBM Type-1 Lobe Cables
(1) Token Ring RJ-45 MAU
(6) AUI Ethernet Transceiver
(6) Token Ring Media Filter
(6) Back-to-Back Serial Cables
(?) Lots of console and patch cables and other odds and
ends
Basically, this is everything that you need and more to
do most of the stuff included on the CCIE lab (except
ATM and Voice). All routers are rack mounted in the
included 19-inch telco rack. All of the equipment has
been working fine since I bought it (almost 2 years) and
is still working fine today.
I have this rack setup at home and can access the PDU
via cable modem and linksys router (not included). This
enables me to power up my equipment from work and telnet
into the equipment. When I am finished, the PDU allows
me to power the equipment off.
As far as price, I am open to reasonable offers. With
regard to shipping, since this is a large amount of
equipment, I would be willing to load this up and meet
you halfway if you are on the East Coast or Midwest. For
west coast, I would need to ship.
Thanks,
Bob Dixon
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:41 GMT-3