From: Omer Ansari (omer@xxxxxxxxxx)
Date: Wed Aug 28 2002 - 23:01:44 GMT-3
D,
why? because its the next tiebreaker in the best path selection after
local pref: (see #3 in)
http://www.cisco.com/warp/public/459/25.shtml
how? using network statements or redist'ing route into bgp locally or
using the aggregrate command. the former two are preferred over the
latter.
HTH
On Tue, 28 Aug 2001, dwclemons wrote:
> Can someone give me an example of why and how I would use the below BGP Path
> Selection Process. I have seen examples using weight, local preference med
> and router-id but none with the below BGP path selection process or just giv
e
> me a link that will provide an example.
> If the local preferences are the same, prefer the path that was originated by
> BGP running on this router
>
>
>
> Thanks
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:41 GMT-3