From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Mon Aug 26 2002 - 23:28:05 GMT-3
Thanks.
--- Donny MATEO <donny.mateo@sg.ca-indosuez.com>
wrote:
>
> I suppose neighbor are only for NBMA, so it's not
> required.
> Donny
>
>
>
>
>
> Peng Zheng
>
>
> <zpnist@yahoo.com To:
> Brian McGahan <brian@cyscoexpert.com>,
> ccielab@groupstudy.com
> > cc:
>
>
> Sent by:
> Subject: RE: OSPF in cyscoexpert sample lab again
>
> nobody@groupstudy
>
>
> .com
>
>
>
>
>
>
>
>
> 27-08-2002 09:43
>
>
> Please respond to
>
>
> Peng Zheng
>
>
>
>
>
>
>
>
>
>
>
>
> I know that. My question is why neighbor are not
> configured on R2, R5, R6, because the network type
> has
> been changed to point-to-multipoint.
>
> --- Brian McGahan <brian@cyscoexpert.com> wrote:
> > Peng,
> >
> > Timers in OSPF are based on the network type.
> I
> > can't seem to
> > find a CCO link for it right now, refer to Doyle
> > vol. 1 for the values.
> >
> > HTH
> >
> > Brian McGahan, CCIE #8593
> > Director of Design and Implementation
> > brian@cyscoexpert.com
> >
> > CyscoExpert Corporation
> > Internetwork Consulting & Training
> > http://www.cyscoexpert.com
> > Voice: 847.674.3392
> > Fax: 847.674.2625
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Peng Zheng
> > > Sent: Monday, August 26, 2002 11:55 AM
> > > To: ccielab@groupstudy.com
> > > Subject: OSPF in cyscoexpert sample lab again
> > >
> > > I noticed to change dead interval between R2,
> R5,
> > R6,
> > > ip ospf network point-to-multipoint has been
> > > configured. I thought neighbor should be
> > configured
> > > but not. Why?
> > >
> > > Thanks for help.
> > >
> > > Best Wishes,
> > > Peng Zheng
> > >
> > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:38 GMT-3