From: Brian McGahan (brian@xxxxxxxxxxxxxxx)
Date: Mon Aug 26 2002 - 22:37:11 GMT-3
Peng,
Timers in OSPF are based on the network type. I can't seem to
find a CCO link for it right now, refer to Doyle vol. 1 for the values.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
http://www.cyscoexpert.com
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Peng Zheng
> Sent: Monday, August 26, 2002 11:55 AM
> To: ccielab@groupstudy.com
> Subject: OSPF in cyscoexpert sample lab again
>
> I noticed to change dead interval between R2, R5, R6,
> ip ospf network point-to-multipoint has been
> configured. I thought neighbor should be configured
> but not. Why?
>
> Thanks for help.
>
> Best Wishes,
> Peng Zheng
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:38 GMT-3