From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Mon Aug 26 2002 - 13:39:09 GMT-3
If synchronization is required, what's my choices? One
is set router id under BGP. Is there any other choice?
--- Brian McGahan <brian@cyscoexpert.com> wrote:
> Peng,
>
> This is only an issue when you have synchronization
> on. In the
> case of this lab, synchronization is off, so it will
> not cause any
> problems. It wouldn't hurt to add it in for clarity
> though.
>
> HTH
>
> Brian McGahan, CCIE #8593
> Director of Design and Implementation
> brian@cyscoexpert.com
>
> CyscoExpert Corporation
> Internetwork Consulting & Training
> http://www.cyscoexpert.com
> Voice: 847.674.3392
> Fax: 847.674.2625
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Peng Zheng
> > Sent: Monday, August 26, 2002 11:16 AM
> > To: ccielab@groupstudy.com
> > Subject: BGP and OSPF synchronize in cyscoexpert
> sample lab
> >
> > Hi,
> >
> > In cyscoexpert sample lab, router-id is used by
> all
> > OSPF configuration, but not BGP.
> >
> > I think BGP id and OSPF id should be synchronized.
> > But why it's not that case?
> >
> >
> > Thanks for help.
> >
> >
> > Best Wishes,
> > Peng Zheng
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:38 GMT-3