From: kasturi cisco (kasturi_cisco@xxxxxxxxxxx)
Date: Sun Aug 25 2002 - 11:58:31 GMT-3
I think on R4 you need to redistribute between OSPF and IGRP/EIGRP and
also between EIGRP/IGRP. OSPF cannot be used a transit protcol for
either of the other two (in fact no protocol can be used as transit
protocol).Mutual redistribution between all of them is needed.
Ensure that loops are prevented due to mutual redistribution using one of
the different ways available.
Good Luck,[IMAGE]
Kasturi.
>From: "ccie candidate" >Reply-To: "ccie candidate" >To:
ccielab@groupstudy.com >Subject: ospf/eigrp/igrp question >Date: Fri, 23
Aug 2002 12:37:08 -0700 > >im doing redistrbution on one router >
>r3-----r4------r6 > | > R2 > >R4 R4 eigrp >R4 R2 ospf >R4 R3 igrp . > >i
want to redistribute between ospf and eigrp >then between osfp and igrp .
> >i noticed that on R3 never sees the routes which are originated by the
Eigrp domain while on R2 they are ok . > >i wonder is it needed on R4 to
redistribute ospf normally into IGRP that the routes in the routing table
to be seen as OSPF ?? > >ie ospf will not redistribute the routes which
is seen in the routing table of R4 as Eigrp because those routes are not
considered to be ospf routes ??? > >do i need in this case to
redistribute eigrp into igrp (different AS) > > >hope someone to comment
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:36 GMT-3