From: jin (jin10101010@xxxxxxxxxxx)
Date: Sat Aug 24 2002 - 08:47:22 GMT-3
Thanks.
But I can't change the ip address of it. Because this network isn't my own netw
ork.
My customer want to know why this network is shown at r3(Branch B) but isn't sh
own at r1(Branch A).
I was talked about the ip addressing, I wanted to make it change to other netwo
rk not a 172.25.0.0/24.
But customer can't do it because of the one problem that they have privately
Your suggestion could be the one of many solution.
But I want to know the reason of this problem.
I think the problem like this one could be happened anywhere.
I know 172.25.0.0 is class B major network. But I already enabled the ip classl
ess and ip subnet-zero. And eigrp is no auto-summary.
Please help me..
TIA.
----- Original Message -----
From: "Malcolm Price" <malcolm@lanbase.com>
To: "jin" <jin10101010@hotmail.com>
Sent: Saturday, August 24, 2002 8:42 PM
Subject: RE: Eigrp Question!
> Hi Jin,
>
> I'm not 100% about this, but there may be an issue using 172.25.0.0/24.
>
> i.e. your network address for r2's loopback is 172.25.0.0 and the host ip is
> 172.25.0.1, with the major net address being 172.25.0.0 (class B by right).
>
> On the surface it may be ok, but if there is some hidden flaw or conflict in
> the ios that may cause you a problem. Try to use a different subnet, just to
> throw out this theory.
>
> Let me know in anycase,
>
> Regards,
> Malcolm
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> jin
> Sent: Saturday, August 24, 2002 10:52 AM
> To: ccielab@groupstudy.com
> Subject: Eigrp Question!
>
>
> My customer's network use the 172.25.0.0/24.
> We have no problem. But r2's loopback address is used for dlsw connection in
> the promiscuous mode. Ip address of this interface is 172.25.0.1/24.
>
> Network is,
> branchA(r1) - HQ(r2)- BranchB(r3) and r1-r2 is metro ethernet and r2-r3 is
> f/r.
>
> ip addressing is,
> r1:172.25.2.1/24 --- 172.25.2.2/24:r2:172.25.3.1/24---------172.25.3.2/24:r3
>
> Routing protocol is eigrp.
>
> if the loop back address of r2 is 172.25.0.1/24, why this network isn't
> appeared on the r1 but I can see the network on the r3.
>
> on the r3, I can see the 172.25.0.0/24 but on the r1 I can't see it.
>
> I don't understand.
> Please help me,cutomer is likely to drive into my house.
>
> Thanks.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:36 GMT-3