From: ccie candidate (ccie1@xxxxxxxxx)
Date: Fri Aug 23 2002 - 05:00:35 GMT-3
sorry it there was a mistake here ..it should be like
so it should be
access-list 901 permit any B8000.0000.0000.0000 ff.ffff.ffff.ffff
--On Thu, 22 Aug 2002 12:10:41 ccie wrote: >My understanding of the scenario is that they want to permit an address range >and deny the rest. >BTW, the IPX network range to allow is B8000-B80FF >Would the following command serve the purpose? > >access-list 801 permit any B8000.0000.0000.0000 B80ff.ffff.ffff.ffff > > > >Quoting ccie candidate <ccie1@lycos.com>: > >> source and destion will be used only for the traffic , not for the routes >> propagated via routing protocols , you can select the routes by the source >> part of the ACL >> >> is this an address range which you want to permit and deny the rest ?? >> >> >> >> >> -- >> >> On Wed, 21 Aug 2002 23:39:35 >> ccie wrote: >> >Router (config)# access-list 800 permit b8022 a8022 >> >The above IPX access list allows only traffic from network b8022 destined >> for >> >network a8022 to be forwarded. >> > >> >How do you write the IPX access list when the scenario asks: >> >allow only network number IPX B8022-B80FF, >> >with no mention of the source or destination? >> > >> >Thanks. > > >-_-_-_ Free Email Service! No Hidden Charges! Click Below to Sign Up -_-_- > This mail sent through http://mail3000.com/register.html >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:35 GMT-3