From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Fri Aug 23 2002 - 04:36:42 GMT-3
I am not sure what you mean here, I am not having Solie atm. So pl. be
specific about the first query.
Regarding the second query.
IP RTP PRIORITY specifies ports to be prioritized, and guaranteed bandwidth
to be assigned, can be used with voice & anythign else as well.
IP RTP Header - compression, compresses data.
They usually go hand in hand, however there is a catch, you need to specify
"bandwidth" after compression (if using RTP header compression along with
priority)
You can also use ip rtp priority on its own (without rtp compression)
If using on non-frame relay interfaces, use IP RTP PRIORITY, and if using on
frame-relay, ideally, specify a map-class and specify frame-relay ip rtp
priority.
rgds
Nick
----- Original Message -----
From: Hotmail <ccie_yong@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, August 23, 2002 4:54 PM
Subject: Solie' s page 438
> Hi, on Solie's pg 438, Thought that you need an additional command of
> "frame-relay traffic-shaping" in interface s2/0 if configure "frame-relay
> class voice" in interface s2/0.1 point-to-pt and secondly is it always
that
> when there is "frame-relay ip rtp priority ...." command in map-class
mode, it
> will have to work in conjunction with "frame-relay ip rtp
header-compression"
> command in interface mode ?
>
> Thanks & Regards
> Yong
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:35 GMT-3