From: Hotmail (ccie_yong@xxxxxxxxxxx)
Date: Fri Aug 23 2002 - 03:25:30 GMT-3
Hi, Jason
Thanks for the reply, so it'll slow down the amount of data it is
transmitting if using "NO frame adaptive-shaping" or "frame adative
shaping".
thanks in advance.
rdgs
Yong
----- Original Message -----
From: "Jason Sinclair" <sinclairj@powertel.com.au>
To: "'Hotmail'" <ccie_yong@hotmail.com>; <ccielab@groupstudy.com>
Sent: Friday, August 23, 2002 2:16 PM
Subject: RE: No frame-relay adaptive shaping
> Yong,
>
> This command allows the router to throttle frame transmission upon the
> receipt of BECN's. It can also be configured to work with foresight as
well.
> Basically what it does is allows the router to slow down the amount of
data
> it is transmitting if the network sends BECN's.
>
> Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Hotmail [mailto:ccie_yong@hotmail.com]
> Sent: Friday, 23 August 2002 15:39
> To: ccielab@groupstudy.com
> Subject: No frame-relay adaptive shaping
>
> Hi,
>
> Found that whenever FR traffic shaping is used, the command "NO
frame-relay
> adaptive shaping" is used in conjunction with other command, like the
> following one:
>
> map-class frame-relay voip
> frame-relay cir 256000
> frame-relay bc 2560
> frame-relay be 600
> frame-relay mincir 256000
> no frame-relay adaptive-shaping
>
> WHEN is the command needed ? and what does the command actually does ? I
> couldn't understand till now.
>
> Appreciate any reply.
>
> Thanks
> Yong
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:35 GMT-3