From: ted.mcdermott@xxxxxxxxxxxxxx
Date: Thu Aug 22 2002 - 15:47:10 GMT-3
Has anyone ever had trouble with activating the BRI 0 port on a 2503 router?
I've swapped cables and ISDN simulator ports to isolate it to the physical
BRI port, which doesn't even flash green. Here's the debug output:
%LINK-3-UPDOWN: Interface BRI0, changed state to up - ISDN T3 timer expired
This is triggered when I type in the ISDN SWITCH-TYPE (basic-ni) statement.
Until then, it sits there in "activating" state. At that point, the debug
states:
BRI: Timer T3 expired. Activation halted
Looks like a bad BRI port??
Thanks,
Ted
************************************************************************
This e-mail and any of its attachments may contain Exelon Corporation
proprietary information, which is privileged, confidential, or subject
to copyright belonging to the Exelon Corporation family of Companies.
This e-mail is intended solely for the use of the individual or entity
to which it is addressed. If you are not the intended recipient of this
e-mail, you are hereby notified that any dissemination, distribution,
copying, or action taken in relation to the contents of and attachments
to this e-mail is strictly prohibited and may be unlawful. If you have
received this e-mail in error, please notify the sender immediately and
permanently delete the original and any copy of this e-mail and any
printout. Thank You.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:33 GMT-3