From: Erick B. (erickbe@xxxxxxxxx)
Date: Thu Aug 22 2002 - 01:00:07 GMT-3
Or just make the ethernet interfaces passive.
--- Jim Brown <Jim.Brown@caselogic.com> wrote:
> Are the routers connected to a switch? Are the
> interfaces connected to the
> switch in different VLANs? I would bet you have each
> routers Ethernet
> interfaces connected to a switch and the all
> interfaces are in the same
> default VLAN.
>
> Each router is seeing the hellos from every
> interface and they are
> complaining about different subnets in the hellos
> than what is configured
> for the receiving interface.
>
> Try segregating the interfaces into separate VLANs
> and see if the messages
> disappear.
>
> -----Original Message-----
> From: Jason Cash [mailto:cash2001@swbell.net]
> Sent: Wednesday, August 21, 2002 7:28 PM
> To: ccielab@groupstudy.com
> Subject: EIGRP / common subnet error msg
>
>
> Running the EIGRP lab (pg.732) in the Solie book and
> keep receiving the
> following EIGRP errors on:
>
> BARNEYs router :
> 00:25:49: IP-EIGRP: Neighbor 172.16.60.1 not on
> common subnet for
> Ethernet0 (172.16.3.1 255.255.255.0)
> 00:26:01: IP-EIGRP: Neighbor 172.16.50.5 not on
> common subnet for
> Ethernet0 (172.16.3.1 255.255.255.0)
> 00:26:13: IP-EIGRP: Neighbor 172.16.60.1 not on
> common subnet for
> Ethernet0 (172.16.3.1 255.255.255.0)
> 00:26:25: IP-EIGRP: Neighbor 172.16.50.5 not on
> common subnet for
> Ethernet0 (172.16.3.1 255.255.255.0)
>
> On Solar Bucks:
> 00:26:26: IP-EIGRP: Neighbor 172.16.60.1 not on
> common subnet for
> Ethernet0 (172.16.50.5 255.255.255.0)
> 00:26:37: IP-EIGRP: Neighbor 172.16.3.1 not on
> common subnet for
> Ethernet0 (172.16.50.5 255.255.255.0)
> 00:26:49: IP-EIGRP: Neighbor 172.16.60.1 not on
> common subnet for
> Ethernet0 (172.16.50.5 255.255.255.0)
>
> My question is this. I can stop the error msgs with
> 'no eigrp
> log-neighbor-warnings' but I am concerned that this
> is not the best
> workaround. I am running 12.2 code. Should I find
> another way or is
> this to be expected with interface in different
> subnets? Here are the
> configs. Also, are small attachments allowed on
> this group as I have a
> scanner and would like to attach the topology map:
>
> Solar_Bucks
> / \
> / \
> G_and_S ----------------- Barney's
>
> G_S
> hostname r1
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> no ip domain-lookup
> !
> no ip dhcp-client network-discovery
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.0
> !
> interface Ethernet0
> ip address 172.16.60.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> !
> interface Serial0.1 point-to-point
> ip address 172.16.128.2 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 102
> !
> interface Serial0.2 point-to-point
> ip address 172.16.128.9 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 103
> !
> interface Serial1
> no ip address
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> router eigrp 1
> network 172.16.0.0
> auto-summary
> no eigrp log-neighbor-changes
> Solar Bucks
> hostname r2
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> no ip domain-lookup
> !
> no ip dhcp-client network-discovery
> !
> interface Loopback0
> ip address 2.2.2.2 255.255.255.0
> !
> interface Ethernet0
> ip address 172.16.50.5 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0.1 point-to-point
> ip address 172.16.128.1 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 201
> !
> interface Serial0.2 point-to-point
> ip address 172.16.128.5 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 203
> !
> interface Serial1
> no ip address
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> router eigrp 1
> network 172.16.0.0
> auto-summary
> no eigrp log-neighbor-changes
> !
> Barney's
> Current configuration : 1270 bytes
> hostname r3
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> no ip domain-lookup
> !
> no ip dhcp-client network-discovery
> !
> interface Loopback0
> ip address 172.16.20.1 255.255.255.0
> !
> interface Ethernet0
> ip address 172.16.3.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> !
> interface Serial0.1 point-to-point
> ip address 172.16.128.6 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 302
> !
> interface Serial0.2 point-to-point
> ip address 172.16.128.10 255.255.255.252
> no ip route-cache
> frame-relay interface-dlci 301
> !
> interface Serial1
> no ip address
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> router eigrp 1
> network 172.16.0.0
> auto-summary
> no eigrp log-neighbor-changes
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:32 GMT-3