From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Wed Aug 21 2002 - 05:52:42 GMT-3
in early versions of ios it works : see below....
Rack03r1(config)#int virtual-TokenRing 0
Rack03r1(config-if)#ip add 1.1.1.1 255.255.255.0
Rack03r1(config-if)#^Z
Rack03r1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.1(5)T, RELEASE SOFTWARE
(fc1)
---------------------------------------------
Rack03r6(config)#interface virtual-tokenRing 0
Rack03r6(config-if)#ip add 1.1.1.1 255.255.255.0
% IP addresses may not be configured on a Virtual-TokenRing interface.
Rack03r6(config-if)#^Z
Rack03r6#sh v
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(2)T, RELEASE SOFTWARE
(fc1)
if ur running very last versions trainer versions of 12.1 then it will not
be option there for configuring ip address and from 12.2 it is removed
totally.
-Mamoor
----- Original Message -----
From: Johnny Tsao <johnnyt@netcat.com>
To: R&S <ccielab@groupstudy.com>
Sent: Wednesday, August 21, 2002 8:58 AM
Subject: virtual-tokenring interface...
> Router4(config)#int virtual-TokenRing 0
> Router4(config-if)#ip add
> Router4(config-if)#ip address 192.168.1.1 255.255.255.0
>
> % IP addresses may not be configured on a Virtual-TokenRing interface.
>
> Router4(config-if)#
>
> do you have to specify a global command or something else? I'm running
> IOS 12.1. However, ipx network command works. go figure.
>
>
> Johnny Tsao, CCIE 8759
> Network Catalyst, Inc.
> Network Operations Center
> www.netcat.com
> netcat_noc@netcat.com
> 877-638-2287 Opt. 1
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:31 GMT-3