From: ted.mcdermott@xxxxxxxxxxxxxx
Date: Tue Aug 20 2002 - 14:07:52 GMT-3
Peng,
The internal network, 6666, should be unique from the NYC-AS internal
network number, 1000. I don't understand, however, why one side has external
network 100 while the other is 101. I believe these should be equal!
Ted
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: Tuesday, August 20, 2002 3:07 AM
To: ccielab@groupstudy.com
Subject: IPXWAN config
Hi,
I'm not understand this:
under:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/atip
x_r/ipx/2rdipx2.htm#xtocid23
There is some config like this:
interface serial 1
no ipx network
encapsulation ppp
ipx ipxwan 6666 100 CHICAGO-AS
On the remote router (NYC-AS):
interface serial 0
no ipx network
encapsulation ppp
ipx ipxwan 1000 101 NYC-AS
I don't understand the network-number part, shouldn't
these values on the two routers be same? If I do not
use unnumbered, how should I choose the value for both
routers?
Thank you for help.
Best Wishes,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:30 GMT-3