From: kasturi cisco (kasturi_cisco@xxxxxxxxxxx)
Date: Mon Aug 19 2002 - 14:32:30 GMT-3
To the best of my knowledge as i understand "IPXWAN" is not mandatory for
NLSP to function. I have tried this without IPXWAN and it works, unless i
have it wrong ?
Anyone care to add or correct !
Good Luck,[IMAGE]
Kasturi.
>From: "ccie candidate" >Reply-To: "ccie candidate" >To:
ccielab@groupstudy.com >Subject: NLSP and IPXWAN >Date: Mon, 19 Aug 2002
08:40:34 -0700 > >folks; >when running nlsp over wan (serial ) one must
use ipxwan ...right ?? > >i read this somewhere multiple times ...i
beleive it is right unless someone has different opinion . > > >when i
config ipxwan i noticed that the network of the ipxwan link didnt show up
in the far end routers ..is this normal ??? > > >say >R1-----R2------R3 >
>R1R2 connection is serial running ipxwan ,while R2R3 is ethernet. > >on
r1 >int ser 0 >ipx ipxwan aa 12 r1 >! >on r2 >int ser 0 >ipx ipxwan bb 12
r2 >! > >now NLSP is running for R1 ,R2,R3 > > >on R3 , the network 12
didnt show up ..however the internal network AA and BB showed normally
... > > >is this normal ? > > > > > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:29 GMT-3