From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Sun Aug 18 2002 - 02:37:00 GMT-3
But for
Traffic Shaping with Router ForeSight Example
under this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/q
cprt4/qcdfrts.htm#xtocid2189924
They have this config:
map-class frame-relay fast_vcs
frame-relay adaptive-shaping foresight
frame-relay traffic-rate 16000 64000
frame-relay cir 56000
frame-relay bc 64000
Why?
--- ccie candidate <ccie1@lycos.com> wrote:
> if you check the command reference for the
> frame-relay traffic-rate command you will find that
> this command is identical to setting the Cir,Bc,Be
> but in just one single command !
>
> you can arbitrary use any of them .
>
> HTH
>
>
>
>
> --
>
> On Sat, 17 Aug 2002 18:53:37
> Peng Zheng wrote:
> >Hi,
> >
> >I don't know what's the relationship between
> >
> >frame-relay traffic-rate average [peak]
> >
> >and
> >
> >frame-relay cir(mir, bc,be).
> >
> >If I'm asked to configure, how can I determine
> which
> >one I should use or I should use both.
> >
> >Thank you for help.
> >
> >Best Wishes,
> >Peng Zheng
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3