From: Peng Zheng (zpnist@xxxxxxxxx)
Date: Fri Aug 16 2002 - 13:05:16 GMT-3
I have no equipments to test. But I think R1 and R2
must have the route to lo0 of other end.
--- Hotmail <o_daramola@hotmail.com> wrote:
> try maximum-paths 2
>
> Yinka
> ----- Original Message -----
> From: "Peng Zheng" <zpnist@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, August 15, 2002 9:47 AM
> Subject: EBGP Load Balance
>
>
> > Hi,
> >
> > I have this config.
> >
> > R1 in AS 100.
> > R2 in AS 200.
> >
> > There are two serial links between them.
> > One on 192.168.1.0/30
> > One on 192.168.2.0/30
> >
> > I want to do load balance on these two links. R1
> has
> > Lo0 with 1.1.1.0/24. R2 has Lo0 with 2.2.2.0/24.
> >
> > I know I need to add ebgp-multi and update-source
> > under BGP config.
> >
> > But I need to config the routes to let R1 and R2
> know
> > how to get each other.
> >
> > I found config with static route like:
> >
> > on R1:
> >
> > ip route 2.2.2.0 255.255.255.0 192.168.1.2
> > ip route 2.2.2.0 255.255.255.0 192.168.2.2
> >
> >
> > But for LAB, static routes are not allowed. How
> can I
> > implement this config without static route?
> >
> >
> > Thank you for help.
> >
> > Best Wishes,
> > Peng Zheng
> >
> >
> >
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3