From: Hotmail (o_daramola@xxxxxxxxxxx)
Date: Fri Aug 16 2002 - 12:02:26 GMT-3
try maximum-paths 2
Yinka
----- Original Message -----
From: "Peng Zheng" <zpnist@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, August 15, 2002 9:47 AM
Subject: EBGP Load Balance
> Hi,
>
> I have this config.
>
> R1 in AS 100.
> R2 in AS 200.
>
> There are two serial links between them.
> One on 192.168.1.0/30
> One on 192.168.2.0/30
>
> I want to do load balance on these two links. R1 has
> Lo0 with 1.1.1.0/24. R2 has Lo0 with 2.2.2.0/24.
>
> I know I need to add ebgp-multi and update-source
> under BGP config.
>
> But I need to config the routes to let R1 and R2 know
> how to get each other.
>
> I found config with static route like:
>
> on R1:
>
> ip route 2.2.2.0 255.255.255.0 192.168.1.2
> ip route 2.2.2.0 255.255.255.0 192.168.2.2
>
>
> But for LAB, static routes are not allowed. How can I
> implement this config without static route?
>
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:27 GMT-3