From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Thu Aug 15 2002 - 07:54:40 GMT-3
You have to work out the bandwidth points. It is dependant on the type of
NPE being used. Check out the following link for more info.
http://www.cisco.com/warp/public/cc/pd/rt/7200/tech/dynac_pg.ppt
Colin
-----Original Message-----
From: Neil G. Legada [mailto:nglegada@hotmail.com]
Sent: 15 August 2002 10:15
To: ccielab@groupstudy.com
Subject: OT: Maximum number of PA-2FE-TX on 7200VXR
Hi Group,
Anybody got an idea what's the maximum PA-2FE-TX that can be installed on a
7200VXR chasis ???
I know that with 4500 only 2 FE interfaces are allowed.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/fasteth.htm#
xtocid24044
Just to confirm if this applies to 7200VXR also. Nothing had been mentioned
on the product literatures.
Appreciate any response and sorry for this OT.
Kind regards,
Neil
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:25 GMT-3