From: Bob Sinclair (bsin@xxxxxxxxx)
Date: Tue Aug 13 2002 - 22:50:47 GMT-3
Brian:
Following your suggestion, I found a doc on using different rotary numbers on d
ifferent vty lines, then telneting to port 3000+rotary number.
Very cool! And all these years I have been telling folks there is no way to ch
oose your vty line! Only goes to show, never say never or can't!
-Bob
----- Original Message -----
From: "Brian Dennis" <brian@5g.net>
To: "'Kyaw Khine'" <kkhine@register.com>; <ccielab@groupstudy.com>
Sent: Tuesday, August 13, 2002 9:17 PM
Subject: RE: Telnet questions
> Look into using the "rotary" command under the vty line if you want to
> telnet to a particular vty.
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Kyaw Khine
> Sent: Tuesday, August 13, 2002 5:05 PM
> To: 'Chuck Church'; 'ccielab@groupstudy.com'
> Subject: RE: Telnet questions
>
> Then... How'd I telnet to particular vty line?
> By default, it'll go to first avialable vty line.
>
> Thanks ..
>
> -----Original Message-----
> From: Chuck Church [mailto:cchurch@MAGNACOM.com]
> Sent: Tuesday, August 13, 2002 7:58 PM
> To: Kyaw Khine; 'ccielab@groupstudy.com'
> Subject: RE: Telnet questions
>
>
> You can apply different access-classes to the various vty lines.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
> Sr. Network Engineer
> Magnacom Technologies
> 140 N. Rt. 303
> Valley Cottage, NY 10989
> 845-267-4000
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Kyaw Khine
> Sent: Tuesday, August 13, 2002 6:48 PM
> To: 'ccielab@groupstudy.com'
> Subject: Telnet questions
>
>
> Hi Group,
>
> Could someone help me out with my problems at work?
>
> #1.
> I want to turn on SSH and turn off telnet completely.
> Is there any way I can turn off or change default error message
> "Password
> required, but none set"?
>
> #2.
> Is there any way I can specify which VTY to telnet from outside?
> Lets say I want VTY 5 for "user cisco" and "password cisco" and I want
> that
> only for VTY 5. And it is not for reverse telnet.
>
> Thanks ..
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:24 GMT-3