RE: Telnet questions

From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Tue Aug 13 2002 - 20:57:42 GMT-3

• Next message: Kyaw Khine: "RE: Telnet questions"
• Previous message: Jignesh Desai: "Redistributing OSPF into IGRP"
• Maybe in reply to: Kyaw Khine: "Telnet questions"
• Next in thread: Kyaw Khine: "RE: Telnet questions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You can apply different access-classes to the various vty lines.

Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kyaw Khine
Sent: Tuesday, August 13, 2002 6:48 PM
To: 'ccielab@groupstudy.com'
Subject: Telnet questions

Hi Group,

Could someone help me out with my problems at work?

#1.
I want to turn on SSH and turn off telnet completely.
Is there any way I can turn off or change default error message "Password
required, but none set"?

#2.
Is there any way I can specify which VTY to telnet from outside?
Lets say I want VTY 5 for "user cisco" and "password cisco" and I want that
only for VTY 5. And it is not for reverse telnet.

Thanks ..

• Next message: Kyaw Khine: "RE: Telnet questions"
• Previous message: Jignesh Desai: "Redistributing OSPF into IGRP"
• Maybe in reply to: Kyaw Khine: "Telnet questions"
• Next in thread: Kyaw Khine: "RE: Telnet questions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:24 GMT-3