RE: Solie- Skynet Lab Solution.

From: sovan parida (sovanp@xxxxxxxxx)
Date: Tue Aug 13 2002 - 11:44:07 GMT-3

• Next message: Raj: "RE: dialer watch and ospf"
• Previous message: Tom Young: "Two ways of ISDN dial-up"
• Maybe in reply to: sovan parida: "Solie- Skynet Lab Solution."
• Next in thread: anthony ohanusi: "RE: Solie- Skynet Lab Solution."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Completely different range.

Sovan

--- Raj <raj.bahad@totalise.co.uk> wrote:
> Hi,
>
> Are R3 and R6 using the same IP address range as the
> OSPF 151.100.0.0
> address or a completely different range?
>
> Raj.
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> sovan parida
> Sent: 13 August 2002 15:19
> To: yakout yakout
> Cc: ccielab@groupstudy.com
> Subject: RE: Solie- Skynet Lab Solution.
>
>
> The question is somewhat like this.
>
> R1----------------R3--------------R6
> OSPF IGRP
> 151.100.0.0/15-->
>
> R3 and R6 link is /24 and R1 is sending a route with
> /15 subnet. R6 need to ping to this 151 network
> without using any static route !!
>
> Sovan.
>
>
> --- yakout yakout <yesmat@iprimus.com.au> wrote:
> > Can you post a quick description to the problem?
> >
> > Yakout
> > #9893
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > Sam.MicroGate@usa.telekom.de
> > Sent: Tuesday, August 13, 2002 10:27 PM
> > To: sovanp@yahoo.com; ccielab@groupstudy.com
> > Subject: RE: Solie- Skynet Lab Solution.
> >
> >
> > I was not able to solve this question in the
> skynet
> > lab. May be we have to
> > use a tunnel or any other solution. You are also
> > right, the solution does
> > not provide an answer for this question. Is any
> one
> > out there know how to
> > solve this? Thanks.
> >
> > Sam
> >
> > -----Original Message-----
> > From: sovan parida [mailto:sovanp@yahoo.com]
> > Sent: Tuesday, August 13, 2002 4:43 AM
> > To: ccielab@groupstudy.com
> > Subject: Solie- Skynet Lab Solution.
> >
> >
> > Hi Group,
> > In the Skynet Lab, the requirement is that R6
> should
> > be able to ping the EIGRP network without adding
> any
> > static route. I didn't get any clue for that in
> the
> > solution provided. Can anybody explain !
> >
> > Thanx and regds...Sovan
> >

• Next message: Raj: "RE: dialer watch and ospf"
• Previous message: Tom Young: "Two ways of ISDN dial-up"
• Maybe in reply to: sovan parida: "Solie- Skynet Lab Solution."
• Next in thread: anthony ohanusi: "RE: Solie- Skynet Lab Solution."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:24 GMT-3