From: Raj (raj.bahad@xxxxxxxxxxxxxx)
Date: Mon Aug 12 2002 - 14:42:37 GMT-3
Hi Group,
I have a simple scenario where to routers (A & B) both have token ring
interfaces attached to them. I am using DLSW+ to connect both peers using
TCP. The problem is that even though the virtual rings have been setup, The
reachability cache does not contain the mac-address for either the local or
remote dlsw peer.
I've racked my brains and have been unable to resolve this. Using the same
config between Ethernet is not a problem.
Config:
Router A
Source bridge ring-group 1000
dlsw local peer peer-id 10.10.10.1
dlsw remote peer 0 tcp 10.10.10.2
interface tokenring0
ip address 10.10.20.1 255.255.255.0
ring-speed 16
source bridge 1 1 1000
source bridge spanning
multiring all
Router B:
Source bridge ring-group 1000
dlsw local peer peer-id 10.10.10.2
dlsw remote peer 0 tcp 10.10.10.1
interface tokenring0
ip address 10.10.30.1 255.255.255.0
ring-speed 16
source bridge 10 1 1000
source bridge spanning
multiring all
Can anyone help?
Raj.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:23 GMT-3