From: Chris Hugo (chrishugo@xxxxxxxxx)
Date: Sat Aug 10 2002 - 19:34:38 GMT-3
Could try GTS.
chris hugoo
Balaji Siva wrote:akhilesh,
You are confusing with LLQ/bandwidth statements of the MQC features.
CBP (class-based policing) or CAR can be used,
http://www.cisco.com/warp/customer/105/cbpcar.html
now, to your question what is the normal burst and max burst refer to the
following doc
http://www.cisco.com/warp/customer/105/carburstvalues.html
regards
Balaji
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Akhilesh Verma
Sent: Saturday, August 10, 2002 1:44 PM
To: ccielab@groupstudy.com
Subject: QOS question from routopia lab 2
Hello Folks,
I have a QOS question :
1) Limit R8 to only upto 10% of its bandwidth for PING traffic .
I think that CBWFQ should be done here . But then again CBWFQ will assign
10% of teh bandwidth not limit the bandwidth . The solutions provided have
used CAR . But if you use CAR . what are the value of normal burst and max
burst to be used ?
Thanks
Akhilesh Verma
------------------------------------------------
------------------------------------------------
Akhilesh Verma,
Cisco Systems Inc.
Systems Engineer
771,Alder Drive,
Milpitas,CA-95035
Pager:800-365-4578
Direct: 408-853-9033
Mobile: 510-501-1182.
E-mail: akverma@cisco.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:22 GMT-3