From: Darryl Munro (Darryl.Munro@xxxxxxxxxxxxxxxxxx)
Date: Fri Aug 09 2002 - 18:39:59 GMT-3
I don't know about anyone else, but this guy is starting to *&^*&%* me off.
Can't you read???? If you know that you need to have ATM SVC configuration
down pat for the Lab then read the (*&*(& book and practice configuring it
on some routers. Having a config from someone on this list is not going to
help you on the day, because you obviously wont be able to walk in with it
written on the back of your hand. If you don't know how to look something up
and make something work from doing this then don't bother having the Doc CD
running while you are in the Lab either.
If anyone else is offended by my harshness here, I apologise, but someone
had to say it.
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: Saturday, 10 August 2002 7:41 a.m.
To: Paul; ccielab@groupstudy.com
Subject: Re: ATM requirement
I think I need some special example. For example, ATM
SVC configuration.
--- Paul <sixfooter777@btopenworld.com> wrote:
> Here's your answer :
>
>
http://www.cisco.com/warp/public/625/ccie/certifications/ATM_FAQs.html
>
> Its a very special link.... :)
>
> Thanks Paul.
>
> ----- Original Message -----
> From: "Peng Zheng" <zpnist@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, August 09, 2002 8:00 PM
> Subject: ATM requirement
>
>
> > Hi,
> >
> > Because LANE has been removed from LAB, what's the
> > requirement for ATM in LAB? I heared only SVC is
> > required, is it right?
> >
> > If so, could anyone give me some example about the
> > configuration or some special link?
> >
> > Thank you for help.
> >
> > Best Regards,
> > Peng Zheng
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:22 GMT-3