From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Fri Aug 09 2002 - 17:16:22 GMT-3
There are many examples on CCO. You will need to look at SVC, PVC, aal5mux,
aal5snap, classical IP, Inverse ARP, RFC 2684 for a start.
Colin
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: 09 August 2002 20:41
To: Paul; ccielab@groupstudy.com
Subject: Re: ATM requirement
I think I need some special example. For example, ATM
SVC configuration.
--- Paul <sixfooter777@btopenworld.com> wrote:
> Here's your answer :
>
>
http://www.cisco.com/warp/public/625/ccie/certifications/ATM_FAQs.html
>
> Its a very special link.... :)
>
> Thanks Paul.
>
> ----- Original Message -----
> From: "Peng Zheng" <zpnist@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, August 09, 2002 8:00 PM
> Subject: ATM requirement
>
>
> > Hi,
> >
> > Because LANE has been removed from LAB, what's the
> > requirement for ATM in LAB? I heared only SVC is
> > required, is it right?
> >
> > If so, could anyone give me some example about the
> > configuration or some special link?
> >
> > Thank you for help.
> >
> > Best Regards,
> > Peng Zheng
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:22 GMT-3