From: Leo Seto (lseto@xxxxxxxxxxxxx)
Date: Fri Aug 09 2002 - 16:59:06 GMT-3
Actually,
I think you're right but you think you're wrong.
ip tftp source-interface should work in this instance. It's protocol t
ftp
(udp 69)
whether you're putting or getting (copy run tftp / copy tftp run).
Leo Seto
Senior Project Manager
ChinaLink Networks, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ying c
Sent: Friday, August 09, 2002 12:08 PM
To: Sam Pilot; ccielab@groupstudy.com
Subject: Re: Source interface for TFTP
Hi Sam,
Never mind my previous mail. It's not going to work as
what you are looking for. That's 'source from' the
interface when the router itself is the tftp server.
You are looking to copy to the tftp server, I think
the router will use the routing table to get to the
tftp server.
Chang
--- Sam Pilot <sam_pilot@hotmail.com> wrote:
> Hi Guys
>
> I want to run the "copy running tftp" command on my
> router.
> Is there anyway that I can force the router to use a
> particular interface as
> the source of the copy.
>
> For example if I have three interfaces on the router
> E0, E1 and E2...can I
> force the copy to happen using E1 as the source IP.
> The router has a route to the TFTP server via
> interface E0. But I dont want
> it to use IP of E0 as its source interface.
>
> Thanks
>
> Sam
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:22 GMT-3