From: Horszczaruk Krzysztof (Krzysztof.Horszczaruk@xxxxxxxxxxxxx)
Date: Fri Aug 09 2002 - 10:01:27 GMT-3
enter "broadcast" at the and of dialer-map
>>>-----Original Message-----
>>>From: Armand D [mailto:ciscoworks2001@yahoo.com]
>>>Sent: Friday, August 09, 2002 7:28 AM
>>>To: ccielab@groupstudy.com
>>>Subject: Learning routes over ISDN link
>>>
>>>
>>>Hi,
>>>
>>>I'm using the backup interface on my R5 to back up my
>>>e0/0. Once my e0/0 interfaces goes down my ISDN dials
>>>out and connects to R3 but, I don't learn any routes
>>>(ospf or IGRP) from R3. How do I get my R3 to
>>>advertise routes over ISDN link once its up ? I'm
>>>trying to set up ISDN dial backup without using
>>>"watch-lists or snapshot routing".
>>>
>>>I have the following topology:
>>>
>>>R3 IGRP
>>>|
>>>ISDN 135.4.35.0/24
>>>|
>>>R5 IGRP/OSPF
>>>|
>>>135.4.34.0/24
>>>
>>>
>>>
>>>=====================
>>>hostname R3
>>>!
>>>username r5 password 0 cisco
>>>!
>>>interface Serial0/0
>>> ip address 135.4.34.3 255.255.255.248
>>> no ip directed-broadcast
>>> encapsulation frame-relay
>>> ip ospf message-digest-key 2 md5 secure
>>> ip ospf network broadcast
>>> ip ospf priority 0
>>> frame-relay map ip 135.4.34.4 304 broadcast
>>> frame-relay map ip 135.4.34.6 304 broadcast
>>> frame-relay lmi-type cisco
>>>!
>>>interface BRI0/0
>>> ip address 135.4.35.6 255.255.255.0
>>> no ip directed-broadcast
>>> encapsulation ppp
>>> dialer map ip 135.4.35.5 name r5 8358663
>>> dialer map ip 135.4.35.5 name r5 8358661
>>> dialer load-threshold 64 outbound
>>> dialer-group 1
>>> isdn switch-type basic-ni
>>> isdn spid1 0835866201 8358662
>>> isdn spid2 0835866401 8358664
>>> ppp callback accept
>>> ppp authentication chap
>>> ppp multilink
>>>!
>>>router ospf 1
>>> redistribute connected subnets
>>> redistribute rip metric 65 metric-type 1 subnets
>>> redistribute igrp 10 metric 64 subnets
>>> network 135.4.3.3 0.0.0.0 area 1
>>> network 135.4.34.0 0.0.0.255 area 1
>>> area 1 authentication message-digest
>>>!
>>>router igrp 10
>>> timers basic 3 5 5 5 5
>>> redistribute connected
>>> redistribute ospf 1 metric 64 10 100 100 100
>>> network 135.4.0.0
>>>!
>>>ip classless
>>>!
>>>access-list 100 permit ip any any
>>>dialer-list 1 protocol ip list 100
>>>
>>>=======================
>>>
>>>R5
>>>username r3 password 0 cisco
>>>!
>>>interface Loopback0
>>> ip address 135.4.5.5 255.255.255.0
>>> no ip directed-broadcast
>>>!
>>>interface Ethernet0/0
>>> ip address 135.4.56.5 255.255.255.0
>>> no ip directed-broadcast
>>> backup delay 1 1
>>> backup interface BRI0/0
>>> backup load 2 1
>>>!
>>>interface BRI0/0
>>> ip address 135.4.35.5 255.255.255.0
>>> no ip directed-broadcast
>>> encapsulation ppp
>>> dialer map ip 135.4.35.6 name r3 8358662
>>> dialer map ip 135.4.35.6 name r3 8358664
>>> dialer load-threshold 64 either
>>> dialer-group 1
>>> isdn switch-type basic-ni
>>> isdn spid1 0835866101 8358661
>>> isdn spid2 0835866301 8358663
>>> ppp callback request
>>> ppp authentication chap callin
>>> ppp multilink
>>> hold-queue 75 in
>>>!
>>>router igrp 10
>>> timers basic 3 5 5 5 5
>>> network 135.4.0.0
>>>!
>>>ip classless
>>>!
>>>access-list 100 permit ip any any
>>>dialer-list 1 protocol ip list 100
>>>
>>>
>>>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:21 GMT-3