From: Phil (ciscostudent1@xxxxxxxxxxxx)
Date: Thu Aug 08 2002 - 15:06:06 GMT-3
Umit,
If your client is a Microsoft computer, you must use "client-identifier" instea
d of hardware-address, take a look:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c/ip
cprt1/1cddhcp.htm#xtocid14
HTH,
Phil
\mit_A~kan_(TK-Network_Gvz|mleri) <umit.askan@probil.com.tr> escreveu: Hi,
I have got a problem about manual dhcp binding. I tried to give the
address 10.10.10.100 to a specific host. This is my conf. it is still
giving an address from the pool.
when I look the bindings ;
R2#sh ip dhcp binding
IP address Hardware address Lease expiration Type
10.10.10.4 0100.104b.aec7.9c Mar 02 1993 12:22 AM
Automatic
10.10.10.100 0100.104b.aec7.9c Infinite Manual
you see there are 2 bindings for that address, but i want the server
give the 10.10.10.100 to that MAC.
no ip dhcp conflict logging
ip dhcp excluded-address 10.10.10.1 10.10.10.3
!
ip dhcp pool umit
network 10.10.10.0 255.255.255.0
dns-server 10.10.10.2
default-router 10.10.10.1
domain-name ccie.com
!
ip dhcp pool static
host 10.10.10.100 255.255.255.0
hardware-address 0100.104b.aec7.9c
I am missing something or I misunderstood something.
Best Regards
umit
\mit A~kan
Consulting Network Engineer
CCNP, CCDP, CCNP-Security, CCNP-Voice Access
> Probil Bilgi Islem Destek ve Danismanlik San. ve Tic. A.S.
Eski Buyukdere Caddesi Dilaver Sokak No.4
Otosanayi 4. Levent 80660 Istanbul
Tel: +90 (212) 317 61 00 (219)
Direkt : +90 (212) 317 62 19
Faks: +90 (212) 325 55 15
E-Mail: umit.askan@probil.com.tr
Web: www.probil.com.tr
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:20 GMT-3