From: CCIE FUN (ccieexam2002@xxxxxxxxx)
Date: Wed Aug 07 2002 - 16:19:04 GMT-3
i am sorry for the type for the 1st answer
i meant use IRDP
--- CCIE FUN <ccieexam2002@yahoo.com> wrote:
> here are the answers to those questions
>
> 1. user IRDP
>
> 2. Can't remember the command on top of my head will
> let you know later for the catalyst
>
> 3. username UNNAMED privilege 15
>
>
>
>
>
> --- "Zhang, Ou (David)" <OuDavid.Zhang@gs.com>
> wrote:
> > Hello,
> >
> > I'm totally stuck with the following questions
> from
> > the CCIE Practical
> > Studies vol. 1. I'd appreciate any answers, hints
> or
> > suggestions. Thanks.
> >
> > p. 1167
> > 9.2 Configure R3 so that workstations in Vlan 30
> can
> > dynamically locate
> > their default gateway. They are not using DHCP.
> (R3
> > hosts Vlan 30.)
> >
> > p. 1175
> > 2.2 Configure the Catalyst so that if the
> backplane
> > of the switch gets
> > overloaded, the ports in VLAN 30 get serviced
> before
> > those in VLAN 50. (The
> > switch hosts these two vlans in question.)
> >
> >
> > p. 1177
> > 11.1 Configure R1 so that when the user unnamed
> logs
> > into the router,
> > that user immediately is put in enable mode.
> >
> > -David
> >
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:19 GMT-3