From: Rick Lowery (ccie_2003@xxxxxxxxxxx)
Date: Tue Aug 06 2002 - 22:45:41 GMT-3
Thanks I just got it... Here is the low down...
copy xmodem: flash:c3550-i5q3l2-mz.121-9.EA1c.bin
after this command the router will prompt you to send data
You must send the file from hyperTerm under transfer tab with
the send command.. Also, you must be directly consoled
to the box.. No term server.....
9600 baud 8N1
----- Original Message -----
From: "Balaji Siva" <bsivasub@cisco.com>
To: "Rick Lowery" <ccie_2003@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, August 06, 2002 9:29 PM
Subject: RE: still working with 3550 IOS (does anyone know how to use XMODEM
with hyperterminal?
> try this
>
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1219ea1/3550scg/sw
> trbl.htm#xtocid2
>
> i have never tried it..so did you try just xmodem: rather than
> xmodem:<filename>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Rick Lowery
> Sent: Monday, August 05, 2002 9:26 PM
> To: ccielab@groupstudy.com
> Subject: still working with 3550 IOS (does anyone know how to use XMODEM
> with hyperterminal?
>
>
> Hello,
>
> My switch is at the boot switch prompt, and I need to load the IOS back on
> with the XMODEM command. Could someone be so kind to help me?
>
> Here are my command and the error from the 3550:
> switch: copy xmodem:c3550-i5q3l2-mz.121-9.EA1c.bin
> flash:c3550-i5q3l2-mz.121-9.EA1c.bin
> Begin the Xmodem or Xmodem-1K transfer now...
> CCCxmodem:c3550-i5q3l2-mz.121-9.EA1c.bin: I/O error
>
> **I'm sending the file with the sendfile command from hyperterminal...
>
> Thanks,
> Rick
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3