From: Dave Madland (dmadlan@xxxxxxxxx)
Date: Tue Aug 06 2002 - 17:38:05 GMT-3
The only vlan command available from the privilaged mode is "vlan
database". I should mention that I am running EMI software.
Dave
Mike Schlenger wrote:
>
> Try the same command from privileged exec mode and NOT config mode. Ex:
> cat3550#vlan 100
>
> I don't have a 3550 to test, but that's the way its done on all other
> 3500's.
>
> Mike
>
> Michael Schlenger
> CCIE #7079
> N2N Solutions
> mschlenger@n2nsolutions.com
> 847.592.3912
>
> -----Original Message-----
> From: Todd Carswell [mailto:acarswell@nc.rr.com]
> Sent: Tuesday, August 06, 2002 2:28 PM
> To: ccielab@groupstudy.com
> Subject: Basic config of the cat 3550
>
> All,
>
> Allrighty, I've finally got my paws on a catalyst 3550. I've accessed
> the software config guide for the 3550 on the Doc CD but things just
> ain't quite right!
>
> The Doc CD instructs the user to access the vlan-config mode by typing
> in the following global config command...
>
> vlan <vlan id>
>
> Here's what I'm getting from the switch...
>
> cat3550(config)# vlan 100 ?
> Unrecognized Command
>
> I'm definitely missing a step. Could someone point me in the right
> direction? I'm hoping that CCO has a page that walks the user through
> some basic setup configs for the cat3550.
>
> Thanks for the help!
>
> Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3