From: Ted Vo (tedv@xxxxxxxxx)
Date: Tue Aug 06 2002 - 17:16:13 GMT-3
You would need to enter the vlan database first before you can create
VTP and VLAN info.
Cat3550#vlan database
Ted
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mike Schlenger
Sent: Tuesday, August 06, 2002 12:45 PM
To: 'Todd Carswell'; ccielab@groupstudy.com
Subject: RE: Basic config of the cat 3550
Try the same command from privileged exec mode and NOT config mode. Ex:
cat3550#vlan 100
I don't have a 3550 to test, but that's the way its done on all other
3500's.
Mike
Michael Schlenger
CCIE #7079
N2N Solutions
mschlenger@n2nsolutions.com
847.592.3912
-----Original Message-----
From: Todd Carswell [mailto:acarswell@nc.rr.com]
Sent: Tuesday, August 06, 2002 2:28 PM
To: ccielab@groupstudy.com
Subject: Basic config of the cat 3550
All,
Allrighty, I've finally got my paws on a catalyst 3550. I've accessed
the software config guide for the 3550 on the Doc CD but things just
ain't quite right!
The Doc CD instructs the user to access the vlan-config mode by typing
in the following global config command...
vlan <vlan id>
Here's what I'm getting from the switch...
cat3550(config)# vlan 100 ?
Unrecognized Command
I'm definitely missing a step. Could someone point me in the right
direction? I'm hoping that CCO has a page that walks the user through
some basic setup configs for the cat3550.
Thanks for the help!
Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3