From: Robert Miller (rmiller@xxxxxxxxxxxx)
Date: Tue Aug 06 2002 - 17:06:31 GMT-3
Use the vlan database privileged EXEC command to enter VLAN configuration mode.
From this mode, you can add, delete, and modify VLAN configurations for normal
-range VLANs and globally propagate these changes by using the VLAN Trunking Pr
otocol (VTP). Configuration information is saved in the VLAN database.
router(config)#vlan database
-------------------------------------------------------------------------------
-
Note VLAN configuration mode is only valid for VLAN IDs 1 to 1005.
-------------------------------------------------------------------------------
-
Syntax Description
This command has no arguments or keywords.
Defaults
No default is defined.
Command Modes
Privileged EXEC
------------------------------------------------
On Tue, 06 Aug 2002 15:28:08 -0400, Todd Carswell <acarswell@nc.rr.com> wrote:
> All,
>
> Allrighty, I've finally got my paws on a catalyst 3550. I've accessed
> the software config guide for the 3550 on the Doc CD but things just
> ain't quite right!
>
> The Doc CD instructs the user to access the vlan-config mode by typing
> in the following global config command...
>
> vlan <vlan id>
>
>
> Here's what I'm getting from the switch...
>
> cat3550(config)# vlan 100 ?
> Unrecognized Command
>
>
> I'm definitely missing a step. Could someone point me in the right
> direction? I'm hoping that CCO has a page that walks the user through
> some basic setup configs for the cat3550.
>
> Thanks for the help!
>
> Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:18 GMT-3