From: bobdu11@xxxxxxx
Date: Tue Aug 06 2002 - 12:52:21 GMT-3
Hints...
1. Check out IRDP
2. Check out port level
3. Check out user access level 15
>
> From: "Zhang, Ou (David)" <OuDavid.Zhang@gs.com>
> Date: 2002/08/06 Tue AM 10:35:14 EDT
> To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> Subject: CCIE Practical Studies
>
> Hello,
>
> I'm totally stuck with the following questions from the CCIE Practical
> Studies vol. 1. I'd appreciate any answers, hints or suggestions. Thanks.
>
> p. 1167
> 9.2 Configure R3 so that workstations in Vlan 30 can dynamically locate
> their default gateway. They are not using DHCP. (R3 hosts Vlan 30.)
>
> p. 1175
> 2.2 Configure the Catalyst so that if the backplane of the switch gets
> overloaded, the ports in VLAN 30 get serviced before those in VLAN 50. (The
> switch hosts these two vlans in question.)
>
>
> p. 1177
> 11.1 Configure R1 so that when the user unnamed logs into the router,
> that user immediately is put in enable mode.
>
> -David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:17 GMT-3