From: Paglia, John (USPC.PCT.Hopewell) (JPaglia@xxxxxxxxxxxxx)
Date: Mon Aug 05 2002 - 21:25:41 GMT-3
OK, I wanna take a stab at this, but PLEASE correct me if I'm wrong, because
I'm not so sure myself...
enable secret level 7 cisco - will allow user to use level 7 commands if
they know the password "cisco"
privilege exec level 7 (cmd) - specifies the command they can use if they
don't know the password.
Am I even in the right ballpark?
Thanks,
Pags
> -----Original Message-----
> From: Pei Gang Zhang [SMTP:peigang@cisco.com]
> Sent: Monday, August 05, 2002 7:55 PM
> To: CCIE
> Subject: how to setting a user's priviledge
>
> question:
> there are many users on router, please limit the user who's password
> is
> 'test' that can not use 'show 'command.
> how to config?
>
>
> Zhang Peigang
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:17 GMT-3